How to Overcome Xiaomi Mi A1 Totally Dead
Long story short, a few days ago I got a job service Android Xiaomi Mi A1 in Stuck Fastboot condition. After I tried to disassemble the case and restart the Stuck Fastboot problem the Xiaomi Mi A1 disappeared and switched to Stuck at the Android One Boot Logo.
I try to leave the Xiaomi Mi A1 in a boot condition, maybe a few minutes later it will turn on normally because usually Xiaomi Android that is stuck fastboot can also be caused by a problematic button.
But after more than 30 minutes, the Xiaomi Mi A1 is still booting android one boot loop. Throughout my personal experience, usually, to overcome a Xiaomi android that is stuck fastboot or boot loop, it can be solved by re-flashing it. Download Firmware Xiaomi MI A1 HERE
Therefore, no need to think long, I immediately flashed the Xiaomi Mi A1 using the MiFlash Tool but it failed, an error always appeared when I tried using the UFI Android ToolBox. the flash process runs normally and without any problems, as shown in the screenshot below:
But it turns out that after re-flashing, the Xiaomi Mi A1 is completely dead and cannot be turned on at all. When connected to a charger the indicator light flashes continuously. if I try to remove the battery connector and try to connect it to a charger, the result is that the Xiaomi Mi A1 doesn't show any signs of life at all.
I was panicked and dizzy, and several times I tried to re-flash with a different Firmware using UFI Android Toolbox to no avail. The Xiaomi Mi A1 remains totally dead. finally, I tried to re-flash the Xiaomi Mi A1 using another tool, namely the Hydra Qualcomm Tool, and Alhamdulillah it worked.
After flashing the Xiaomi Mi A1 finished using the Hydra Qualcomm Tool, Alhamdulillah Xiaomi Mi A1 rose from the dead. for friends who may be experiencing the same case as I have experienced, please try to re-flash the completely dead Xiaomi Mi A1 using the Hydra Qualcomm Tool.