01 August 2020
Easy way to ByPass Pattern and MI Cloud Xioami Redmi Note 3
At the same time here I will also share a tutorial on how to deal with Android Xiaomi Note 3 which is locked by Mi Cloud (Mi Account) easily. Xiaomi Redmi Note 3 uses Qualcomm's Chipshet, and for its ByPass Pattern and Mi Cloud processes it uses the EDL Test Point method.
Adroid Xiaomi Redmi Note 3 Test Point is between the battery connectors, more details, see the picture above. I show the test point with a red line. In the Test Point process the battery connector does not need to be installed, so just remove the battery connector, connect Xiaomi Redmi Note 3 with a computer using a USB cable then do a test point that is connecting two test points using tweezers or other equipment that can conduct electricity.
How to ByPass Pattern and MI Account Redmi Note 3 with MRT and WODM ToolAfter Android Xiaomi Redmi Note 3 is connected to the computer in Qualcomm USB-HS QD Loader 9008 mode. Run the MRT Key Application, then select the XiaoMi tab. In Mobile Options select Redmi Note3, for port let Auto, Operation Options Select Format (9008 function) then click Start.
Wait for the Format (ByPass Pattern) process by MRT Key to finish. A notification will appear All is done !! which indicates the Format / ByPass process is complete and successful.
Until here Android Xiaomi Redmi Note 3 is free from Pattern Lock or Screen PIN problems. Unplug the USB cable, re-plug the battery connector and try turning on the Xiaomi Redmi Note 3.
When turned on Xiaomi Redmi Note 3 will look like stuck in loading Mi, just wait no need to worry about the time needed to get into Setup mode of using a new device is quite long between 5-10 minutes.
But if previously Android & Xiaomi Redmi Note 3 has been synchronized with the Mi Account, then the Xiaomi Redmi Note 3 will automatically be locked Mi Account.
Enter MI Password Android account Xiaomi Redmi Note 3 that was synchronized last time. If you don't remember the Mi Account Password, you have to bypass it.
Reconnect the Android Redmi Note 3 in Qualcomm EDL mode, then reopen the MRT Key Application. If the previously selected option is Format (9008 function) now select Erase Account then click Start.
Wait for the Mi Account ByPass process, if the notification appears All is done !!! that means the bypass process is complete and successful.
Unplug the USB Cable, plug the Batrai Connector back in and try to turn on Xiaomi Redmi Note 3. The initial appearance after the Mi Cloud bypass will be like the photo below:
Just wait until the progress bar is full and Xiaomi Redmi Note 3 will go directly into use mode, without having to repeat Settings for using a new device.
To ensure that the Android Xiaomi Redmi Note 3 is completely safe from the Mi Account locked problem, install the SIM card and connect it to the internet network. Can use a data connection from a SIM card or connect it to a WIFI network.
Based on the Mi Account bypass test results using the MRT Key on Android Xiaomi Redmi Note 3 the results are instantly permanent. Android Xiaomi Redmi Note 3 is securely installed on a SIM card and connected to the internet network. usually for other Xiaomi Android Type, must be done bypass the second stage using the WODM Tool.
If it turns out that the Android Xiaomi Redmi Note 3 is locked again by Mi Account because it is connected to the internet network. Re-bypass using the MRT Key, then don't install the SIM card or connect to the internet network. just activate the Developer Options by tab 7 times in a row MIUI version
Enable OEM Unlock and USB Debugging for the ByPass Mi Cloud process using the WODM Tool Application.
Connect the Android Xiaomi Redmi Note 3 with a computer using a USB cable. Make sure your computer has installed Pda.Net so that later Redmi Note 3 devices can be read in ADB USB Debungging mode.
Run the WODM Tool Application Klick Unlock Mi Account on the WODM Tool to start the execution. Here I take an example of how to bypass the Mi Cloud on Redmi 5A using the WODM Application.
If USB debug permission appears? Click Okay. Click Unlock MI Account and wait for the ByPass process to complete
All Done By WODM TOOL notifications appear ...! that means the Mi Cloud bypass process was successful. Redmi Note 3 will restart by itself and as an effect of the MI Account bypass using the WODM Tool sometimes will sometimes start Waiting For Debugger notifications. just ignore the notification every time it appears, Klick Force Close. The results of bypass using the WODM Tool can be said to be semi-permanent. Because if Redmi Note 3 is done HardReset or flashed again, MI Account will be locked again and must be done byass. Want to subscribe to the Latest Post Update Notification? Please Join with Us Berbagi Tutorial Online WhatsApp Grup or Blogger SEO Knowledge On Google News