How to Flash Redmi 2 Pro 2014819 on Windows 11

Today Alhamdulillah I got a Job Service Android Xiaomi Redmi 2 Pro with a Stuck problem in the MI Boot Logo. So this Redmi 2 Pro Android, based on the owner's description when turned on, just stuck on Mi Boot until the Drop Battery ran out of power.

Usually, the first step that can be taken to fix an Android that is stuck on the Boot Logo is to re-flash it, if after re-flashing it still isn't resolved, usually, we need to check the condition of the hardware, especially the Power button and Volume UP or Volume Down.

Because based on my experience, mostly when Android Stuck at Boot Logo, in Recovery or turned off and failed to be fixed by flashing the cause or culprit is a short in the Power or Volume Button.

How to Flash Redmi 2 Pro 2014819 with UFI Box

In the process of flashing the Redmi 2 Pro with code 201819 you can see behind the battery, I experienced several flash failures when using the MiFlash Tool. Where there are error notifications, even though I have tried changing MiFlash versions and also moving the location of the Firmware file to the Desktop and Driver C with the folder name MIUI.

Therefore, it can be concluded that the following tutorial is a solution for those of you who have failed to flash Redmi 2 Pro 2014819 using the MiFlash Tool. Beforehand please Download Firmware Xiaomi Redmi 2 Pro 2014819 Password: 112233

First position the Redmi 2 Pro into Flash boot mode, the way is to press the Volume Down and Power buttons simultaneously or it can also be done by pressing the Volume Down button then plug in the USB connector that was previously connected to the computer (Redmi 2 Pro's Initial Position is in Power OFF).

After Redmi 2 Pro enters Fasboot mode and connects to the computer via USB data cable, run UFI Android ToolBox. Select FASTBOOT Option, Xiaomi Band, Qualcomm Platform, Model Redmi 2 Prime Pro (wt88047_Pro) then select Firmware Redmi 2 Pro 2014819 which you previously placed in the Xiaomi Redmi 2 Profile folder in the UFI Directory on Drive C.

Just click Flash, and wait for the flashing process to complete by itself. For more details, please watch the following video:

After the Flashing process is complete, the Xiaomi Redmi 2 Pro Android will automatically restart by itself, wait for the boot process and Redmi 2 to Enter the Device Usage Setup Mode.

Alhamdulillah, Finally Redmi 2 Pro which was originally Stuck in the Boot Logo and Super Stubborn failed to be flashed using the MiFlash Tool was able to turn on normally and is ready to be used again as it should.

That's the Tutorial Guide on How to Accurately Flash Redmi 2 Pro 2014819 which Bootloop Stuck on the Super Stubborn Mi Boot Logo Failed to Flash using the MiFlaash Tool and penetrated using the UFI Android Tool Box on Windows 11 that you can try to practice.
want to subscribe to the Latest Post Update Notifications? Please Follow Blogger Knowledge On Google News. Yuk...Subscribe Channel Youtube Berbagi Tutorial Online for those of you who like tutorials in the form of video recordings.